Teknik Komputer Dan Jaringan

memberikan informasi seputar komputer dan jaringan

Home » Internet » Jaringan » Cara Setting DNS

Cara Setting DNS

Cara Setiing DNS - Setting Modem Speedy anda untuk mendapatkan kecepatan internet yang sangat maksimal. Informasi setting modem yang digunakan untuk layanan Telkom Speedy

DSL-302T
Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

  1. Klik Setup
  2. Klik Connection
  3. Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
  4. Klik Tools
  5. Klik System Commands, Save All, Restart
  6. d-link


Setting PPPoE/Router:

  1. Klik Setup
  2. Klik Connection
  3. Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username: nmrspeedy@telkom.net; Password: (password dari telkom); VPI=8; VCI=81, Apply
  4. Klik Tools
  5. Klik System Commands. Save All, Restart
  6. d-link2

adsl Modem Repotec

  1. Buka Internet Explorer ketik: http://192.168.1.1
  2. Username: admin & Password: epicrouter
  3. Klik: OK
  4. Klik WAN
  5. Pic Adapter: Pvc0
  6. Klik Submit
  7. Virtual Circuit = Enabled
  8. Bridge & IGMP = Disable
  9. Each region was different from another region and for Bandung vpi:8 , vci: 81
  10. Service Category = UBR without PCR
  11. Protocol/Conection type = PPPoE
  12. Encapsulation = LLC/Snap-Bridging
  13. Put Username & Password from your provider
  14. Klik Submit.
  15. Klik Save Configuration (wait till Saving configuration done.)
  16. put DNS: 202.134.0.155 & 202.134.2.5


Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

  1. Klik Advanced Setup
  2. Klik WAN
  3. Find VPI/VCI: 8/81, Klik Edit
  4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
  6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
  7. WAN Setup - Summary, Save
  8. Save/Reboot

Setting PPPoE:

  1. Klik Advanced Setup
  2. Klik WAN
  3. Cari VPI/VCI: 8/81, Klik Edit
  4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
  6. Put your PPP Username: Nomorspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
  7. Centang Enable WAN Service, Service Name: Speedy, Next
  8. WAN Setup - Summary, Save
  9. Save/Reboot


Default IP: 192.168.1.1
Default username: admin
Default password: admin

Setting Bridge:

  1. Klik Advanced Setup
  2. Klik WAN
  3. Find VPI/VCI: 8/81, Klik Edit
  4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  5. Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
  6. Cheklist Enable Bridge Service, Service Name: Speedy, Next
  7. WAN Setup - Summary, Save
  8. Save/Reboot
  9. dareglobal


Setting PPPoE:

  1. Klik Advanced Setup
  2. Klik WAN
  3. Find VPI/VCI: 8/81, Klik Edit
  4. ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
  5. Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
  6. Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
  7. Cheklist Enable WAN Service, Service Name: Speedy, Next
  8. WAN Setup - Summary, Save
  9. Save/Reboot

Setting Modem Articonet ACN-100R dan ACN-110
Cara melakukan setting di komputer untuk akses ke modem Articonet. Untuk setting di komputer dilakukan sesuai dengan operating system yang dipakai di komputer pelanggan, disini yang dibahas khusus untuk Windows XP. Lakukan network setting di PC (komputer) sbb:

a. Start – Control Panel – Network Connection
b. arahkan kursor pada Local Area Connection yang aktif, kemudian klik kanan dan pilih properties
c. kemudian pilih menu Internet Protocol (TCP/IP) dan klik 2X, maka akan muncul menu General.
d. Pilih Obtain an IP Address Automatically kemudian pilih Obtain DNS server address automatically, kemudian tekan tombol OK.

Panduan cara setting modem ADSL Speedy koneksi PPPoE.(PPPoE)

  1. Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
  2. Masukkan username dan password: admin/admin
  3. Setelah masuk ke menu setting lakukan langkah berikut:
  4. Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" disebelah kanan tabel WAN Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
  5. VPI = X
  6. VCI = XX
  7. Service Category = UBR Without PCR, kemudian klik tombol Next
  8. Connection type = PPPoE
  9. Encapsulation = LLC, kemudian klik tombol Next
  10. Masukkan username dan password Speedy, kemudian klik tombol Next
  11. Tandai atau kasih v untuk pilihan "Enable WAN Service", kemudian klik Next dan klik tombol Save
  12. Setting PPPoE untuk koneksi Speedy telah selesai dilakukan
  13. Selanjutnya klik tombol Save/Reboot
  14. (Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)

Berikut langkah setting modem ADSL Articonet untuk Dial-Up/Bridge.

  1. Setting modem dilakukan melalui browser dengan mengakses alamat http://192.168.1.1
  2. Masukkan username dan password: admin/admin
  3. Setelah masuk ke menu setting lakukan langkah berikut:
  4. Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
  5. VPI = X
  6. VCI = XX
  7. Service Category = UBR Without PCR, kemudian klik tombol Next
  8. Connection type = Bridging
  9. Encapsulation = LLC, kemudian klik tombol Next
  10. Tandai atau kasih v untuk pilihan "Enable Bridge Service", kemudian klik Next dan klik tombol Save
  11. Setting Bridge untuk koneksi Speedy telah selesai dilakukan
  12. Selanjutnya klik tombol Save/Reboot
  13. (Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)
  14. Setting modem Articonet untuk koneksi Bridging sudah selesai, langkah berikutnya setting koneksi Dial-Up di PC/komputer.

Panduan instalasi Dial Up koneksi ADSL menggunakan Windows 2000:

  1. Klik Start, klik Setting,klik Control Panel,
  2. Klik Network and Dial Up Connections.
  3. Klik Make New Connection, klik Next,
  4. Klik Dial Up to the Internet
  5. Klik I want to setup my internet manually, klik Next
  6. Klik I connect through a phone line and a modem klik Next
  7. Pilih dan klik modem ADSL yang sesuai
  8. Isi username:15xxxxxxxxxx@telkom.net
  9. Password: xxxxxxxx
  10. Klik OK dan Lanjutkan sesuai perintah yang muncul
  11. Klik Finish

Panduan installasi Dial Up koneksi ADSL menggunakan Windows Xp:

  1. Klik Start, klik Setting, klik Control Panel.
  2. Klik Network Connection
  3. Klik Create a New Connection, klik Next.
  4. Klik Connect to the Internet, klik Next
  5. Klik Setup my connection manually, klik Next
  6. Klik Connect Using Dial Up, klik Next
  7. Klik modem ADSL yang sesuai, klik Next
  8. Isi username: 15xxxxxxxxxx@telkom.net dan Password: *******
  9. Confirm password: xxxxxxxx
  10. kemudian beri tanda v pada pilihan "Add a shortcut to the desktop screen"
  11. Klik Finish
Sumber : Telkomspeedy

DISTRIBUTOR GROSIR MAINAN ANAK MURAH
Cara Setting DNS Rating: 4.5 Diposkan Oleh: Almarogi

Artikel Terkait Cara Setting DNS :

1 comments:

Note: Only a member of this blog may post a comment.

Subscribe to: Post Comments (Atom)